Réparez vos affaires Communauté Boutique

Tatung TAC-6G Light Element Replacement

Introduction

The device contains small lights that indicate whether the rice is cooking or being kept warm. In this guide we will the expose the light bulb circuitry to check if it is broken and replace the light bulbs if necessary.

Ce dont vous avez besoin

  1. Tatung TAC-6G Light Element Replacement, Light Element: étape 1, image 1 de 1

    • Start with the device standing upright.

    Traduire

  2. Tatung TAC-6G Light Element Replacement: étape 2, image 1 de 1

    • Remove the 11mm Phillips screw from below the power component panel.

    Traduire

  3. Tatung TAC-6G Light Element Replacement: étape 3, image 1 de 1

    • Pull the panel away from the rice cooker.

    • Remove the 9mm Phillips screw from behind the power component dashboard that is connected to the light plate.

    Traduire

  4. Tatung TAC-6G Light Element Replacement: étape 4, image 1 de 1

    • Pull the light plate from the power component panel.

    Traduire

  6. Tatung TAC-6G Light Element Replacement: étape 5, image 1 de 1

    • Flip the rice cooker device upside down.

    Traduire

  7. Tatung TAC-6G Light Element Replacement: étape 6, image 1 de 2 Tatung TAC-6G Light Element Replacement: étape 6, image 2 de 2

    • Remove the one 7mm Phillips screw from the side of the brass panel

    • Lift the brass plate off of the device and set it aside.

    Traduire

  8. Tatung TAC-6G Light Element Replacement: étape 7, image 1 de 1

    • Remove the 7mm Phillips screw holding the white and maroon colored wires that are connected to the heating element.

    Traduire

  9. Tatung TAC-6G Light Element Replacement: étape 8, image 1 de 1

    • Remove the 10mm Phillips screw that connects the white, blue and black wires to the white plastic piece in the corner of the device.

    Traduire

  10. Tatung TAC-6G Light Element Replacement: étape 9, image 1 de 1

    • Remove the 7mm Phillips screw that connects two white wires and one red wire to the heating "warm" switch.

    Traduire

  11. Tatung TAC-6G Light Element Replacement: étape 10, image 1 de 1

    • Using your hand, pull out the light plate with the maroon red and black wires.

    Traduire

  12. Tatung TAC-6G Light Element Replacement: étape 11, image 1 de 1

    • Replace the light plate dashboard.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Erin Charles

Membre depuis le 01/28/16

215 Réputation

1 tutoriel rédigé

Badges: 6

+ 3 badges supplémentaires

Équipe

University of Alabama, Team 1-6, Sydow campbell Spring 2016 Membre de l'équipe University of Alabama, Team 1-6, Sydow campbell Spring 2016

UA-SYDOW CAMPBELL-S16S1G6

4 membres

3 tutoriels rédigés

Un commentaire

Reverse the steps for reassembly.

Tom Anderson - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 619