Introduction

The stylus, which actually reads the record and transmits the signal, wears out over time. According to the TEAC manual for this device, that should be around 50 hours. Replacing or cleaning the stylus will help improve sound quality if done correctly, but should be done very carefully.

  1. Turn off record the player before making repairs.
    • Turn off record the player before making repairs.

    • Unplug the record player.

    Ajouter un commentaire

  2. Open the lid to access the turntable, arm, and stylus.
    • Open the lid to access the turntable, arm, and stylus.

    Ajouter un commentaire

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Press down on the front of the red stylus and pull forward to remove it from the arm.

    Ajouter un commentaire

    • Insert a new stylus by pushing it back up where the old one was, or, if necessary, clean the old one and replace likewise.

    Ajouter un commentaire

Ligne d'arrivée

Une autre personne a terminé cette réparation.

Charles Lockner

Membre depuis le 17/09/2012

103 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 2-61, Propen Fall 2012 Membre de l'équipe Cal Poly, Team 2-61, Propen Fall 2012

CPSU-PROPEN-F12S2G61

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 9

Total : 1,211