Réparez vos affaires Communauté Boutique

Teenage Engineering OP-Z Back Cover Replacement

Introduction

Use this guide to open the OP-Z and replace the back cover.

  1. Teenage Engineering OP-Z Back Cover Replacement, Back Cover: étape 1, image 1 de 3 Teenage Engineering OP-Z Back Cover Replacement, Back Cover: étape 1, image 2 de 3 Teenage Engineering OP-Z Back Cover Replacement, Back Cover: étape 1, image 3 de 3

    • Unlock the four rubber feet by turning them 90° counterclockwise using your thumb or finger tip.

    • There is a tiny mark on every foot facing the bottom edge of the OP-Z. After turning them they should face towards the short edge where the on/off switch is.

    Modifier

  3. Teenage Engineering OP-Z Back Cover Replacement: étape 2, image 1 de 2 Teenage Engineering OP-Z Back Cover Replacement: étape 2, image 2 de 2

    • When turning the OP-Z over again the bottom plate should come off by itself (thanks gravity).

    • If the bottom plate won’t come off you might want to make sure every foot is rotated correctly and gently tug on one of them.

    Modifier

  4. Teenage Engineering OP-Z Back Cover Replacement: étape 3, image 1 de 1

    • Remove the bottom plate including the rubber feet.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

Tobias Isakeit

Membre depuis le 03/31/14

117 597 Réputation

188 tutoriels rédigés

Badges: 46

+ 43 badges supplémentaires

Équipe

Master Techs Membre de l'équipe Master Techs

Community

322 membres

2 530 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 17

Total : 1,501