Aller au contenu principal

The Beatles Rock Band Drum Set Drum Pad Replacement

Ce dont vous avez besoin

  1. The Beatles Rock Band Drum Set Drum Pad Replacement, Drum Pad: étape 1, image 1 de 2 The Beatles Rock Band Drum Set Drum Pad Replacement, Drum Pad: étape 1, image 2 de 2
    • Pry the drum pad off of the drum set.

    • This will take significant force, but the rubber on the drum pad can withstand the force.

  2. The Beatles Rock Band Drum Set Drum Pad Replacement: étape 2, image 1 de 2 The Beatles Rock Band Drum Set Drum Pad Replacement: étape 2, image 2 de 2
    • Remove the small wire clip shown in the picture.

    • If this wire is already disconnected, that is most likely the cause for the drum pad not working.

  3. The Beatles Rock Band Drum Set Drum Pad Replacement: étape 3, image 1 de 1
    • Remove the four Phillips size J0 screws supporting the hit sensor.

    • There is a small plastic disk and a spring in the support; be sure not to lose it.

  4. The Beatles Rock Band Drum Set Drum Pad Replacement: étape 4, image 1 de 1
    • The sensor can be peeled off of the drum pad.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Zach Richter

Membre depuis le 01/24/17

549 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 13-3, Banghart Winter 2017 Membre de l'équipe Cal Poly, Team 13-3, Banghart Winter 2017

CPSU-BANGHART-W17S13G3

4 membres

5 tutoriels rédigés

Un commentaire

Where can you buy replacement sensor?

Barry Howard - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 12

30 derniers jours : 61

Total : 7,927