Réparez vos affaires Communauté Boutique

The Claw Item Replacement

Introduction

After repeated use of the claw machine, eventually you will run out of toys or candy to grab. In order to complete this task you will need to remove the top cover of your claw machine. Follow this user friendly guide to assist you with this task.

Ce dont vous avez besoin

  1. The Claw Item Replacement, Top Cover: étape 1, image 1 de 1

    • Place The Claw machine in the up-right position with the control knobs facing you.

    Modifier

  2. The Claw Item Replacement: étape 2, image 1 de 1

    • Turn The Claw machine upside-down placing the top cover on the surface of your work area.

    Modifier

  3. The Claw Item Replacement: étape 3, image 1 de 1

    • Remove all ten 6mm phillips #1 screws underneath the top cover using your #1 phillips head screwdriver.

    • It is helpful to choose a clear, well lit work space. There are multiple tiny screws that are easy to lose.

    Modifier

  4. The Claw Item Replacement: étape 4, image 1 de 1

    • Turn The Claw machine back to the upright position with controls facing you.

    Modifier

  6. The Claw Item Replacement: étape 5, image 1 de 1

    • Remove the top cover of The Claw machine.

    Modifier

  7. The Claw Item Replacement: étape 6, image 1 de 2 The Claw Item Replacement: étape 6, image 2 de 2

    • Remove the ten 6 mm phillips #1 screws from the top flange.

    Modifier

  8. The Claw Item Replacement: étape 7, image 1 de 1

    • Lift the flange upward and off to the side of the machine.

    • There is enough wire connecting the flange to the machine that you will not need to cut the wire. The flange can be moved off to the side of the machine while you are working.

    • Cutting or ripping out the wire will cause damage to the machine so try not to put much tension on the wire.

    Modifier

  9. The Claw Item Replacement, Overfill: étape 8, image 1 de 1

    • After emptying out contents have The Claw machine facing you

    Modifier

  10. The Claw Item Replacement: étape 9, image 1 de 1

    • View the Claw machine from the top

    Modifier

  11. The Claw Item Replacement: étape 10, image 1 de 1

    • Place thumb on grip section and pull away from the Claw machine.

    Modifier

  12. The Claw Item Replacement: étape 11, image 1 de 1

    • Place items in the Claw machine.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Alain Pierre

Membre depuis le 03/22/16

1 188 Réputation

9 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

UMass Dartmouth, Team 4-8, Catania Spring 2016 Membre de l'équipe UMass Dartmouth, Team 4-8, Catania Spring 2016

UMASSD-CATANIA-S16S4G8

3 membres

18 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 9

30 derniers jours : 17

Total : 1,324