Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

Unfortunately, my iFixit kit has not yet arrived, so I had to use my Wiha drivers and generic spudger. This is pretty simple to do!

Pièces

Aucune pièce spécifiée.

  1. Remove the nine Phillips screws using a Philips 00 screwdriver Remove the nine Phillips screws using a Philips 00 screwdriver Remove the nine Phillips screws using a Philips 00 screwdriver
    • Remove the nine Phillips screws using a Philips 00 screwdriver

  2. Pry up the case carefully using a spudger. Make sure to not push the spudger in too far, as this could result in internal damage
    • Pry up the case carefully using a spudger.

    • Make sure to not push the spudger in too far, as this could result in internal damage

  3. Lift off the cover, and you're done!
    • Lift off the cover, and you're done!

Conclusion

To reassemble, place the bottom cover on and push until you hear a satisfying click. Keep doing this until the whole cover is secured. Then, screw all of the screws back in!

3 autre(s) ont terminé cette réparation.

[deleted]

Membre depuis le 18/03/2018

1 167 Réputation

3 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 8

Total : 928