Introduction

Use this guide to disassemble the wheel and get access to the interior components of your Thustmaster Ferrari 458 Spider Racing Wheel.

Remove the black 10mm using a JIS #1 screw driver.
  • Remove the black 10mm using a JIS #1 screw driver.

  • There are 12 screws.

  • Two of the screws are deep inside the device you might need to use a slim screwdriver.

  • In the picture you see a plastic opining tool instead of screw driver because we did not have our screw driver when we were taking the picture.

Ajouter un commentaire

Remove the two 10mm black screws on the top of device using a Hex 2.5mm Key. Only the two outside screws.
  • Remove the two 10mm black screws on the top of device using a Hex 2.5mm Key. Only the two outside screws.

  • Gently pull apart both halves of device to access inside.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mohammed Alsogair

Membre depuis le 18/10/2017

213 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team S1-G33, Cagle Fall 2017 Membre de l'équipe USF Tampa, Team S1-G33, Cagle Fall 2017

USFT-CAGLE-F17S1G33

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 14

30 derniers jours : 68

Total : 688