Aller au contenu principal

TiVo Series 2 TCD540080 Power Supply Replacement

Ce dont vous avez besoin

  1. TiVo Series 2 TCD540080 Power Supply Replacement, Removal of TiVo Series 2 TCD540080 Case: étape 1, image 1 de 1
    • Power down the TiVo and detach the power cable from the rear of the unit.

    • Wait 5 minutes for the unit to fully discharge before proceeding to the next step.

  2. TiVo Series 2 TCD540080 Power Supply Replacement: étape 2, image 1 de 1
    • Remove the five T10 screws from the rear of the case using the Torx screwdriver.

  3. TiVo Series 2 TCD540080 Power Supply Replacement: étape 3, image 1 de 2 TiVo Series 2 TCD540080 Power Supply Replacement: étape 3, image 2 de 2
    • Lift up and pull back the outer casing towards the rear of the unit.

  4. TiVo Series 2 TCD540080 Power Supply Replacement, Power Supply: étape 4, image 1 de 2 TiVo Series 2 TCD540080 Power Supply Replacement, Power Supply: étape 4, image 2 de 2
    • Carefully remove the ribbon cable from the power supply. Hold the ribbon on both sides and pull up.

  5. TiVo Series 2 TCD540080 Power Supply Replacement: étape 5, image 1 de 1
    • Disconnect the hard drive power cable. Firmly grip the white power connector and pull away from the hard drive.

    • Do not pull on the power cables when disconnecting power connector.

  6. TiVo Series 2 TCD540080 Power Supply Replacement: étape 6, image 1 de 1
    • Rotate the device 180 degrees and remove the two T10 screws from the power supply board.

  7. TiVo Series 2 TCD540080 Power Supply Replacement: étape 7, image 1 de 2 TiVo Series 2 TCD540080 Power Supply Replacement: étape 7, image 2 de 2
    • Remove the four plastic standoffs.

    • Use pliers to squeeze the plastic pieces on the head together. Carefully press down on the standoff and pull up on the power supply.

  8. TiVo Series 2 TCD540080 Power Supply Replacement: étape 8, image 1 de 2 TiVo Series 2 TCD540080 Power Supply Replacement: étape 8, image 2 de 2
    • Lift the power supply out of the unit.

    • Do not touch any circuit elements or capacitors on the power supply, as they may hold a charge after the unit has been shut off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Svyatoslav Markeyev

Membre depuis le 04/16/10

135 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 33-79, Johann Spring 2010 Membre de l'équipe Cal Poly, Team 33-79, Johann Spring 2010

CPSU-JOHANN-S10S33G79

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 5,160