Pièces

  1. Here are the tools you will need:
    • Here are the tools you will need:

      • Standard Screwdriver

      • New Pannier Whole Clip Bracket

      • Wrench

    Ajouter un commentaire

  2. To remove clip bracket, first remove all 3 clips using the #2 screwdriver or hand drill (Make sure to put clips and their screws and anchor plates in a safe place as to not misplace any such as a Ziploc bag).
    • To remove clip bracket, first remove all 3 clips using the #2 screwdriver or hand drill (Make sure to put clips and their screws and anchor plates in a safe place as to not misplace any such as a Ziploc bag).

    Ajouter un commentaire

    • Unscrew all 13 small black screws. To do so, undo velcro flap located at the top of the laptop sleeve. With the wrench, hold nut in place in the back of the pannier.

    Ajouter un commentaire

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • While holding nuts with the wrench, use the screwdriver to unscrew the screw in the front bracket.

    Ajouter un commentaire

    • Remove old clip. Take new clip bracket and unscrew and remove middle clip.

    Ajouter un commentaire

    • Replace the middle clip and screw it into place on the bag. Place the new clip bracket in place and screw in all 13 screws again.

    • As in step 3 and 4, hold nut with wrench while screwing clip in place. (Be sure to keep washers in between the screws and the body of the bag)

    Ajouter un commentaire

    • You're done!

    Ajouter un commentaire

Ligne d'arrivée

Emilee

Membre depuis le 13/03/2014

1 341 Réputation

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 2

30 derniers jours : 7

Total : 998