Réparez vos affaires Communauté Boutique

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement

Introduction

Use this guide to replace the bypass valve assembly in your Titan Impact 410 Airless Sprayer.

Ce dont vous avez besoin

  1. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Safety precautions: étape 1, image 1 de 2 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Safety precautions: étape 1, image 2 de 2

    • Before you begin, make sure to follow the pressure relief procedure documented in the user manual before powering down the paint sprayer and disconnecting the pump.

    • Turn off and unplug the sprayer.

    Traduire

  2. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the valve handle: étape 2, image 1 de 3 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the valve handle: étape 2, image 2 de 3 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the valve handle: étape 2, image 3 de 3

    • Use a flat punch tool and a hammer to tap the groove pin from left to right out of the valve handle.

    Traduire

  4. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement: étape 3, image 1 de 2 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement: étape 3, image 2 de 2

    • Remove the valve handle from the cam base.

    • During reassembly, apply grease to the cam base before reattaching the valve handle.

    Traduire

  5. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the cam base: étape 4, image 1 de 3 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the cam base: étape 4, image 2 de 3 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the cam base: étape 4, image 3 de 3

    • Remove the cam base.

    Traduire

  6. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Loosen the bypass valve assembly: étape 5, image 1 de 2 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Loosen the bypass valve assembly: étape 5, image 2 de 2

    • Use a 13/16" wrench, or an adjustable wrench, to loosen the bypass valve assembly.

    • Rotate the wrench counterclockwise.

    Traduire

  7. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the bypass valve assembly: étape 6, image 1 de 2 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the bypass valve assembly: étape 6, image 2 de 2
    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 1 autre contributeur

Alex Diaz-Kokaisl

Membre depuis le 01/16/22

129 318 Réputation

600 tutoriels rédigés

Badges: 34

+ 31 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

140 membres

18 076 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 8

30 derniers jours : 30

Total : 549