Réparez vos affaires Communauté Boutique

TomTom Go 60 S Motherboard Replacement

Introduction

This guide is to help instruct how to replace the motherboard of the TomTom Go 60 S. The motherboard in the main circuit for the device.

Ce dont vous avez besoin

  1. TomTom Go 60 S Motherboard Replacement, Motherboard: étape 1, image 1 de 1

    • Use the iFixit opening tool to pry open the TomTom Go 60 S. Start from a corner and drag the tool around the device.

    Modifier

  2. TomTom Go 60 S Motherboard Replacement: étape 2, image 1 de 1

    • Carefully pull the back cover apart from the front cover. Be careful not to pull too hard because there are two sets of wires connecting the device

    Modifier

  4. TomTom Go 60 S Motherboard Replacement: étape 3, image 1 de 1

    • Once the two covers are separated, use your fingers, to gently disconnect the wires that are connected to the motherboard from the back cover.

    Modifier

  5. TomTom Go 60 S Motherboard Replacement: étape 4, image 1 de 1

    • Next, you must remove the motherboard from the front screen.

    • Use a Phillips #000 screwdriver to unscrew the screws.

    Modifier

  6. TomTom Go 60 S Motherboard Replacement: étape 5, image 1 de 2 TomTom Go 60 S Motherboard Replacement: étape 5, image 2 de 2

    • Separate the motherboard from the front cover, you must disconnect the wires connecting the two.

    Modifier

  7. TomTom Go 60 S Motherboard Replacement: étape 6, image 1 de 1

    • The motherboard is now disconnected from the front assembly

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Ambermarie Dawdy

Membre depuis le 10/04/16

74 Réputation

2 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

USF Tampa, Team 1-6, Nance Fall 2016 Membre de l'équipe USF Tampa, Team 1-6, Nance Fall 2016

USFT-NANCE-F16S1G6

4 membres

5 tutoriels rédigés

Un commentaire

What is the purpose of single yellow wire ?

is it ok if it is disconnected ? I fear to have unsoldered it or is it just an alone wire ?

Thanks

ugo ceruti - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 3

30 derniers jours : 18

Total : 1,263