Réparez vos affaires Communauté Boutique

TomTom One XL Power Button Replacement

Introduction

This guide will teach you how to disassemble your TomTom One XL and expose the power button for cleaning or repair.

Ce dont vous avez besoin

  1. TomTom One XL Power Button Replacement, Back Panel: étape 1, image 1 de 2 TomTom One XL Power Button Replacement, Back Panel: étape 1, image 2 de 2

    • Remove the 4 .4mm screws on the back of the device.

    Modifier

  2. TomTom One XL Power Button Replacement: étape 2, image 1 de 1

    • Using the palate knife tool, pry the back from the LCD screen. Apply a moderate pressure to separate them.

    • You can rotate TOMTOM XL to make prying back off easier.

    • Be careful not to injure the two wires connecting the pieces.

    Modifier

  3. TomTom One XL Power Button Replacement: étape 3, image 1 de 1

    • After prying both halves apart, they will be connected by two wires.

    • Carefully set the two halves next to each other making sure not to stress or damage the wires.

    Modifier

  5. TomTom One XL Power Button Replacement: étape 4, image 1 de 2 TomTom One XL Power Button Replacement: étape 4, image 2 de 2

    • Using the tweezers separate the wires connecting the battery and speaker to the mother board.

    • Be gentle while pulling the wires out, the plugs are easily injured.

    Modifier

  6. TomTom One XL Power Button Replacement, Power Button: étape 5, image 1 de 1

    • Using a Torx 6 screwdriver, remove the 4 .5mm screws connecting the motherboard to the screen assembly.

    • The motherboard is connected to the screen assembly via a ribbon wire. After removing the screws, be careful not to damage the wire or the port.

    Modifier

  7. TomTom One XL Power Button Replacement: étape 6, image 1 de 2 TomTom One XL Power Button Replacement: étape 6, image 2 de 2

    • Detach the ribbon wire from it's port on the back of the motherboard.

    Modifier

  8. TomTom One XL Power Button Replacement: étape 7, image 1 de 3 TomTom One XL Power Button Replacement: étape 7, image 2 de 3 TomTom One XL Power Button Replacement: étape 7, image 3 de 3

    • Now the power button is exposed and any obstructions can be easily removed.

    • If you want to replace the button it can easily be popped out using your hands.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Jesse

Membre depuis le 03/11/15

101 Réputation

1 tutoriel rédigé

Badges: 6

+ 3 badges supplémentaires

Équipe

Colorado Springs, Team 9-6, Panko Spring 2015 Membre de l'équipe Colorado Springs, Team 9-6, Panko Spring 2015

UCCS-PANKO-S15S9G6

3 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 7

30 derniers jours : 15

Total : 2,194