Réparez vos affaires Communauté Boutique

TomTom One XL Screen Replacement

Introduction

Before beginning this guide you should have completed guides on removing the back cover and separating the circuit board from the front cover.

Ce dont vous avez besoin

  1. TomTom One XL Screen Replacement, Back Panel: étape 1, image 1 de 2 TomTom One XL Screen Replacement, Back Panel: étape 1, image 2 de 2

    • Remove the 4 .4mm screws on the back of the device.

    Modifier

  2. TomTom One XL Screen Replacement: étape 2, image 1 de 1

    • Using the palate knife tool, pry the back from the LCD screen. Apply a moderate pressure to separate them.

    • You can rotate TOMTOM XL to make prying back off easier.

    • Be careful not to injure the two wires connecting the pieces.

    Modifier

  3. TomTom One XL Screen Replacement: étape 3, image 1 de 1

    • After prying both halves apart, they will be connected by two wires.

    • Carefully set the two halves next to each other making sure not to stress or damage the wires.

    Modifier

  5. TomTom One XL Screen Replacement: étape 4, image 1 de 2 TomTom One XL Screen Replacement: étape 4, image 2 de 2

    • Using the tweezers separate the wires connecting the battery and speaker to the mother board.

    • Be gentle while pulling the wires out, the plugs are easily injured.

    Modifier

  6. TomTom One XL Screen Replacement, Screen: étape 5, image 1 de 2 TomTom One XL Screen Replacement, Screen: étape 5, image 2 de 2

    • Locate the 4 .4mm screws connecting the circuit board to the front panel.

    • Use the T6 Torx screwdriver and remove the four screws.

    Modifier

  7. TomTom One XL Screen Replacement: étape 6, image 1 de 3 TomTom One XL Screen Replacement: étape 6, image 2 de 3 TomTom One XL Screen Replacement: étape 6, image 3 de 3

    • Locate the ribbon cable connecting the front panel to the circuit board.

    • Locate the white tab locking the ribbon in place.

    • Using precision tweezers push the left and right side of the tab forward.

    • Gently pull the ribbon to disconnect the circuit board from the front panel.

    • If gently pulling on the ribbon doesn't release it then the tab hasn't been pushed far enough forward.

    Modifier

  8. TomTom One XL Screen Replacement: étape 7, image 1 de 3 TomTom One XL Screen Replacement: étape 7, image 2 de 3 TomTom One XL Screen Replacement: étape 7, image 3 de 3

    • Use the palate knife to pry the screen away from the front panel.

    • Pry between the light gray board and the black boarder of the TOMTOM XL screen.

    • Use moderate pressure when prying, slide the palate knife back and forth, and eventually the screen should pop out.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

DeVhan

Membre depuis le 03/11/15

401 Réputation

4 tutoriels rédigés

Badges: 4

+ 1 badge de plus

Équipe

Colorado Springs, Team 9-6, Panko Spring 2015 Membre de l'équipe Colorado Springs, Team 9-6, Panko Spring 2015

UCCS-PANKO-S15S9G6

3 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 5

Total : 907