Aller au contenu principal

Top Removal

Ce dont vous avez besoin

  1. Top Removal, The Ninja Master Prep QB900B: étape 1, image 1 de 1
    • Place the blender to the side.

  2. Top Removal: étape 2, image 1 de 2 Top Removal: étape 2, image 2 de 2
    • Remove the two highlighted screws with a Phillips #2 Screw Driver

    • Gently pull off the top.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Kamal Taha

Membre depuis le 08/27/15

679 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team 1-3, Sullivan Fall 2015 Membre de l'équipe USF Tampa, Team 1-3, Sullivan Fall 2015

USFT-SULLIVAN-F15S1G3

3 membres

5 tutoriels rédigés

Un commentaire

My unit has something other than Phillips screws holding the top together. It appears to be an Allen head, not a torx, closest fit was a 2mm Allen wrench but that was still too small. What head could this be?

Keith Johnson - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 19

Total : 2,995