Toro Lawn Mower Cutting Blade Replacement

Introduction

Replacing the cutting blade on a lawn mower is important to ensure that your grass is cut correctly and that your lawn mower is running efficiently. This is a simple fix that requires little to no expertise or previous experience. Just make sure to be careful when handling the blade itself and all should run smoothly.

Ce dont vous avez besoin

Étape 1 Cutting Blade

Toro Lawn Mower Cutting Blade Replacement, Cutting Blade: étape 1, image 1 de 1

Disconnect the spark plug to ensure that the lawn mower does not accidentally turn over and cause the mower to turn on.

Traduire

Étape 2

Flip the mower onto its side exposing the blade and under carriage.

Traduire

Étape 3

Place wood in between the blade and the wall of the mower to ensure that the blade does not move while you are tightening or loosening the bolt.

Traduire

Étape 4

Using the 5/8 wrench, turn the blade counter clockwise until the bolt is loose then pull the blade off.
Make sure that safety gloves are worn at all times when handling the new or old cutting blade.

Traduire

Étape 5

Place the new blade in right side up into the bracket and line up the bolt.
Make sure that safety gloves are being worn at all times when handling either the new or old cutting blade.

Traduire