Aller au contenu principal

Pièces

Aucune pièce spécifiée.

  1. Remove the two rubber tabs near the front of the computer with a metal spudger and with  PH0 Phillips head screwdriver, carefully remove all ten screws and place in a safe location.
    • Remove the two rubber tabs near the front of the computer with a metal spudger and with PH0 Phillips head screwdriver, carefully remove all ten screws and place in a safe location.

  2. Ensure that there is no debris, dust, or any other foreign materials blocking the Wi-Fi PCB.
    • Ensure that there is no debris, dust, or any other foreign materials blocking the Wi-Fi PCB.

  3. Carefully peel back the yellow tape by either folding it back or removing it entirely. Use the same PH0 Phillips head screwdriver to remove the single screw that connects the motherboard to the Wi-Fi PCB.
    • Carefully peel back the yellow tape by either folding it back or removing it entirely. Use the same PH0 Phillips head screwdriver to remove the single screw that connects the motherboard to the Wi-Fi PCB.

  4. When the screw has been removed, the board will naturally spring up. Carefully apply light pressure to back the PCB out of its port.
    • When the screw has been removed, the board will naturally spring up. Carefully apply light pressure to back the PCB out of its port.

  5. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  6. Disconnect the black wire that is plugged onto the 1 or AUX terminal by simply lightly pulling it from the board.
    • Disconnect the black wire that is plugged onto the 1 or AUX terminal by simply lightly pulling it from the board.

  7. Disconnect the white wire from the 2 or Main plug by lightly pulling it from the PCB.
    • Disconnect the white wire from the 2 or Main plug by lightly pulling it from the PCB.

  8. Use metal spudger tool to release the lever that holds the data cable to the board.
    • Use metal spudger tool to release the lever that holds the data cable to the board.

  9. Disconnect the speaker wire by gently pulling it out of the port.
    • Disconnect the speaker wire by gently pulling it out of the port.

  10. Remove all three cables with a spudger that were hidden by the battery.
    • Remove all three cables with a spudger that were hidden by the battery.

  11. Remove motherboard from within the laptop. Remove motherboard from within the laptop.
    • Remove motherboard from within the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ongela Helm

Membre depuis le 26/11/2018

109 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team S6-G6, Wilson Fall 2018 Membre de l'équipe IUPUI, Team S6-G6, Wilson Fall 2018

IUPUI-WILSON-F18S6G6

3 membres

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 52