Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the three 6mm Phillips head screws on the back of the DVD player with a Phillips #1 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two 3mm Phillips screws on each side of the DVD player using the Phillips #1 screwdriver.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using your hand, gently lift the black top panel and safely place it off to the side.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The fan will be attached to the case, connected to the yellow circuit board.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two 7mm Phillips head screws attaching the fan to the case of the DVD player.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use your fingers to unplug the red and black wire from the yellow circuit board to completely remove the fan.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.