1. To expose the hard drive, use a bit driver and a Star #0 bit to remove the two designated screws.
    • To expose the hard drive, use a bit driver and a Star #0 bit to remove the two designated screws.

    • Gently lift the panel off.

    Ajouter un commentaire

  2. With the panel removed, slide the hard drive towards the top of the netbook with moderate force.
    • With the panel removed, slide the hard drive towards the top of the netbook with moderate force.

    • This will free the hard drive from its original location.

    Ajouter un commentaire

    • Obtain a new hard drive.

    • Apply firm pressure to secure the new hard drive into the old hard drive's location.

    Ajouter un commentaire

    • Place the back panel in its original position.

    • Using the bit driver and Phillips #0 bit, secure the hard drive panel to the netbook body.

    Ajouter un commentaire

Ligne d'arrivée

Une autre personne a terminé cette réparation.

Mason McCaskill

Membre depuis le 18/10/2013

943 Réputation

9 tutoriels rédigés

Équipe

Clemson, Team 14-2, Benson Fall 2013 Membre de l'équipe Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 22

Total : 1,729