Aller au contenu principal

Toshiba NB205 N330PK Keyboard Replacement

Ce dont vous avez besoin

  1. Toshiba NB205 N330PK Keyboard Replacement, Power Button: étape 1, image 1 de 2 Toshiba NB205 N330PK Keyboard Replacement, Power Button: étape 1, image 2 de 2
    • Start by first removing the battery.

    • Move the first release switch to the right position.

    • Move the second release switch to the right position while pulling the battery towards the top of the netbook.

  2. Toshiba NB205 N330PK Keyboard Replacement: étape 2, image 1 de 2 Toshiba NB205 N330PK Keyboard Replacement: étape 2, image 2 de 2
    • Using the bit driver and a Phillips #0 bit, remove the three circled screws, 5 mm in length.

    • Using the bit driver and a Phillips #0 Bit, remove the two circled screws labelled F6. (These hold the keyboard) one screw may be under a rubber stopper

  3. Toshiba NB205 N330PK Keyboard Replacement: étape 3, image 1 de 2 Toshiba NB205 N330PK Keyboard Replacement: étape 3, image 2 de 2
    • While holding the top of the netbook, flip the netbook over.

  4. Toshiba NB205 N330PK Keyboard Replacement: étape 4, image 1 de 2 Toshiba NB205 N330PK Keyboard Replacement: étape 4, image 2 de 2
    • Carefully lift off the power bar assembly for access to the button and receiver.

  5. Toshiba NB205 N330PK Keyboard Replacement, Keyboard: étape 5, image 1 de 2 Toshiba NB205 N330PK Keyboard Replacement, Keyboard: étape 5, image 2 de 2
    • Use the spudger to gently pry around the keyboard. This will release the keyboard assembly from the body.

  6. Toshiba NB205 N330PK Keyboard Replacement: étape 6, image 1 de 2 Toshiba NB205 N330PK Keyboard Replacement: étape 6, image 2 de 2
    • Reach under the keyboard and disconnect the electrical connection.

    • Lift the broken keyboard off.

  7. Toshiba NB205 N330PK Keyboard Replacement: étape 7, image 1 de 3 Toshiba NB205 N330PK Keyboard Replacement: étape 7, image 2 de 3 Toshiba NB205 N330PK Keyboard Replacement: étape 7, image 3 de 3
    • Reattach the new electrical connection into the old connection location.

    • Place the keyboard into the original location starting with the bottom first.

    • Gently press the keyboard down to secure it into its original location.

Ligne d'arrivée

Une autre personne a terminé cette réparation.

Mason McCaskill

Membre depuis le 10/18/13

1 000 Réputation

9 tutoriels rédigés

Équipe

Clemson, Team 14-2, Benson Fall 2013 Membre de l'équipe Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 membres

27 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 5

Total : 830