1. Use a bit driver and a Phillips #0 bit to remove the one 5 mm retaining screw.
    • Use a bit driver and a Phillips #0 bit to remove the one 5 mm retaining screw.

    • Lift the panel up and out of the way.

    Ajouter un commentaire

  2. The RAM chip is secured by two retaining arms that run parallel with the chip. Gently pull these arms in opposite directions off of the chip.
    • The RAM chip is secured by two retaining arms that run parallel with the chip. Gently pull these arms in opposite directions off of the chip.

    • After the retainer arms are free, push the chip towards the top of the netbook. This will free the chip for removal.

    Ajouter un commentaire

  3. Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    • Push the replacement RAM into the original position.

    • Reattach both securing arms onto the sides of the RAM chip.

    Ajouter un commentaire

    • Place the panel back into the securing slots and let it rest in its original position.

    • With the bit driver and Phillips #0 bit, secure the panel down with one screw.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mason McCaskill

Membre depuis le 18/10/2013

943 Réputation

9 tutoriels rédigés

Équipe

Clemson, Team 14-2, Benson Fall 2013 Membre de l'équipe Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 288