Introduction

In this guide, you will learn how to disassemble the broken/damaged screen from the rest of the laptop, allowing you to replace it for a new one. This guide will also teach you what the proper and necessary tools are for this repair.

Using a plastic opening tool, remove all stickers covering the screws.
  • Using a plastic opening tool, remove all stickers covering the screws.

  • Note: There are 6 locations; 2 at the top corners, 2 at the bottom corners, and 2 more at the bottom, towards the center of the screen.

Ajouter un commentaire

Remove all six 3.8mm screws from the screen using a #1 Phillips screwdriver.
  • Remove all six 3.8mm screws from the screen using a #1 Phillips screwdriver.

Ajouter un commentaire

  • With a plastic opening tool, prop the plastic panel up to separate it from the rest of the laptop.

  • Slowly pull the plastic panel from the entire laptop.

Ajouter un commentaire

  • Remove the four 5 mm screws with a Phillips #1 screwdriver, each located at the four corners of the screen.

Ajouter un commentaire

  • Carefully lift up the screen from the rest of the laptop and let it lean towards you, as it is still attached to cords and other wirings.

  • Remove all white tape that hold the cords and wirings together.

Ajouter un commentaire

  • Note: Some parts need unplugging. Slowly and carefully unplug each of the components.

Ajouter un commentaire

  • At this point, the screen should be completely disconnected from the rest of the laptop.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Varsha Roopreddy

Membre depuis le 19/04/2013

1 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 4-17, Maness Spring 2013 Membre de l'équipe Cal Poly, Team 4-17, Maness Spring 2013

CPSU-MANESS-S13S4G17

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 7

Total : 1,083