Pièces

Aucune pièce nécessaire.

Make sure the device is off to prevent data loss.
  • Make sure the device is off to prevent data loss.

  • Slide both latches to the unlocked position to release the battery.

  • Switch the latch on the right to reveal red. The latch on the left needs to be held.

  • Pull the battery toward you while holding the left latch.

Ajouter un commentaire

Remove the sixteen screws at the locations shown with the Phillips 00 screwdriver.
  • Remove the sixteen screws at the locations shown with the Phillips 00 screwdriver.

Ajouter un commentaire

  • Pull up on the back casing and remove it, revealing the audio/usb port.

Ajouter un commentaire

  • Remove the single 4 mm screw holding the port in place with the Phillips 00 screwdriver.

Ajouter un commentaire

  • Use the plastic opening tool to disconnect the port from its power source on the laptop. This will be the wire connector with the white connection.

Ajouter un commentaire

  • Remove the ribbon cable from the port to free it from the laptop.

  • Be careful when reconnecting the ribbon cable, it can be difficult.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

JRJones

Membre depuis le 19/04/2013

121 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 2-19, Maness Spring 2013 Membre de l'équipe Cal Poly, Team 2-19, Maness Spring 2013

CPSU-MANESS-S13S2G19

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 762