Introduction

This guide gives instructions on how to remove the fuse located on the yellow motherboard of the Toshiba SD-K740 DVD player.

Pièces

Aucune pièce nécessaire.

  1. Make sure the DVD player is unplugged before beginning.
    • Make sure the DVD player is unplugged before beginning.

    • Remove the three .303 inch screws from the back panel using a #0 Phillips head screwdriver.

  2. Turn the DVD player on its side.
    • Turn the DVD player on its side.

    • Remove the .303 inch screw.

    • Now flip the DVD player onto its other side.

    • Remove the .303 inch screw from this side.

    • Flip the DVD player over onto it's front face.

    • Remove the back panel by lifting up and pulling it towards yourself.

    • Use the plastic opening tool to gently pop the fuse out of the restraining brackets.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

John Lokker

Membre depuis le 20/01/2011

319 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 1-16, Amido Winter 2011 Membre de l'équipe Cal Poly, Team 1-16, Amido Winter 2011

CPSU-AMIDO-W11S1G16

4 membres

8 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 15

Total : 3,377