Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the three 7.7 mm screws from the back panel using a Phillips #0 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Turn the DVD player on its side.
-
Remove the 7.7 mm screw.
-
Flip the DVD player onto its other side.
-
Remove the 7.7 mm screw.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Flip the DVD player over onto its front face.
-
Remove the back panel by lifting up and pulling it towards yourself.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift and push away the two tabs located in the middle of the player.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift and slide forward the single tab on the side.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Grasp the front panel and pull forward to your right to remove it.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the black tie holding the two rear ribbon cables together by untwisting it.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the first of two multipin cables connected to the Left-Side Motherboard (Green) by pulling vertically.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the second of two multipin cables connected to the Left-Side Motherboard (Green) by pulling vertically.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the two cables to the right to disentangle from the disc drive.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the first of three ribbon cables on the left hand side of the disc drive by pulling vertically.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the second of three ribbon cables on the left hand side of the disc drive by pulling vertically.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the third of three ribbon cables on the left hand side of the disc drive by pulling vertically.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four .320 inch screws holding the motherboard to its casing.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Push the motherboard forward a few inches to detach it from the casing.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the motherboard from the rear and pull backward (towards you) to remove it entirely from the case.
-