Introduction

This guide provides step by step instructions of how to replace a faulty keyboard.

Pièces

Aucune pièce nécessaire.

Flip the laptop over so the bottom is facing up.
  • Flip the laptop over so the bottom is facing up.

  • Slide each of the three tabs on the bottom half of the assembly into the unlocked position.

Ajouter un commentaire

Gently lift the battery out of the computer.
  • Gently lift the battery out of the computer.

Ajouter un commentaire

  • Remove the single 3mm Phillips #00 screw that secures the wireless card cover.

Ajouter un commentaire

  • Remove the WIFI module cover. It will pull right off.

Ajouter un commentaire

  • Unplug the white and black wires from the WiFi module.

Ajouter un commentaire

  • Remove the twelve 8mm button head Phillips #00 B8 screws.

  • Remove the two 14 mm button head Phillips #00 B14 screws.

  • Remove the two 10 mm Phillips #00 battery compartment screws.

  • Remove the two 8 mm Phillips #00 screws.

Ajouter un commentaire

  • Remove the seven 4mm flat Phillips #00 screws.

  • Remove the seven 20mm button head Phillips #00 screws.

Ajouter un commentaire

  • Use the plastic opening tool to pry the two halves apart.

Ajouter un commentaire

  • Using a screw driver for assistance, pop open the plastic cover and snap it off of the hinges. Repeat on the opposite side.

Ajouter un commentaire

  • Remove the two 3mm Phillips #00 screws.

Ajouter un commentaire

  • Slide keyboard out and away from the upper assembly.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Aditya Varkhedi

Membre depuis le 01/10/2013

104 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 14-8, Forte Fall 2013 Membre de l'équipe Cal Poly, Team 14-8, Forte Fall 2013

CPSU-FORTE-F13S14G8

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 515