Pièces

Aucune pièce nécessaire.

Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens. It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel's sides and then front edge. It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel's sides and then front edge.
  • Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens.

  • It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel's sides and then front edge.

Ajouter un commentaire

Remove the top panel by popping the panel out the top left socket, then do the same with the right side. Remove the top panel by popping the panel out the top left socket, then do the same with the right side.
  • Remove the top panel by popping the panel out the top left socket, then do the same with the right side.

Ajouter un commentaire

Remove the two 3.67 mm screws from the top corners of the keyboard. Remove the two 3.67 mm screws from the top corners of the keyboard. Remove the two 3.67 mm screws from the top corners of the keyboard.
  • Remove the two 3.67 mm screws from the top corners of the keyboard.

Ajouter un commentaire

Use fingers to lift up the keyboard from the top.
  • Use fingers to lift up the keyboard from the top.

  • Do not try to remove the keyboard completely because it is still attached to the motherboard.

Ajouter un commentaire

Remove the cable connecting the keyboard with the motherboard. Be aware of the locking tabs on each side of the ribbon-cable connector—they slide back about 2mm to free the cable. Lift up and remove the keyboard.
  • Remove the cable connecting the keyboard with the motherboard.

  • Be aware of the locking tabs on each side of the ribbon-cable connector—they slide back about 2mm to free the cable.

  • Lift up and remove the keyboard.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Garrett Gudgel

Membre depuis le 05/10/2010

714 Réputation

13 tutoriels rédigés

Équipe

Cal Poly, Team 4-43, Amido Fall 2010 Membre de l'équipe Cal Poly, Team 4-43, Amido Fall 2010

CPSU-AMIDO-F10S4G43

5 membres

13 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 3,960