Aller au contenu principal

Introduction

Removing the bottom lower case of your Toshiba Satellite device will allow you to access its inner components, such as the RAM. This will be useful for most repairs.

Pièces

Aucune pièce spécifiée.

  1. Click button 1 to the unlocked position.
    • Click button 1 to the unlocked position.

    • This button will have a 1 by it.

  2. Push and hold button 2 to the left. As you push button 2 to the left position, simultaneously lift up the battery pack.
    • Push and hold button 2 to the left.

    • As you push button 2 to the left position, simultaneously lift up the battery pack.

    • This button will have a 2 by it.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Using the Phillips #1 screwdriver, remove the eleven 2.5mm screws. Using the Phillips #1 screwdriver, remove the eleven 2.5mm screws.
    • Using the Phillips #1 screwdriver, remove the eleven 2.5mm screws.

  5. Remove the one 2.5mm Phillips #1 middle plate screw.
    • Remove the one 2.5mm Phillips #1 middle plate screw.

  6. Lift up the middle vent panel.
    • Lift up the middle vent panel.

    • Set the panel to the side.

  7. Using the plastic opening tool, remove the outer panel and set to the side. Be careful not to break the back of the computer. Be careful not to break the back of the computer.
    • Using the plastic opening tool, remove the outer panel and set to the side.

    • Be careful not to break the back of the computer.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Amber van Solingen

Membre depuis le 29/01/2018

630 Réputation

6 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 25

Total : 243