Aller au contenu principal

Introduction

If you ever find yourself wishing you had more capacity in your laptop's hard drive, replacing your old one with a larger one might be the option for you. This guide will show you how to replace the old hard drive in a Toshiba Satellite with a new one.

Pièces

Aucune pièce spécifiée.

  1. Press down with your fingers while also applying a sliding motion on the latch buttons near the battery on the underside of your laptop.
    • Press down with your fingers while also applying a sliding motion on the latch buttons near the battery on the underside of your laptop.

  2. Lift the battery upward with your fingers out of the battery compartment.
    • Lift the battery upward with your fingers out of the battery compartment.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Place the laptop with the bottom facing up. Remove the single 6mm Phillips #1 screw keeping the laptop panels in place. Remove the single 6mm Phillips #1 screw keeping the laptop panels in place.
    • Place the laptop with the bottom facing up.

    • Remove the single 6mm Phillips #1 screw keeping the laptop panels in place.

  5. Using the Phillips #1 screwdriver, remove the 8mm screw that is holding the hard drive in place.
    • Using the Phillips #1 screwdriver, remove the 8mm screw that is holding the hard drive in place.

  6. Use your finger to lift the hard drive up. Pull out the hard drive to the right.
    • Use your finger to lift the hard drive up.

    • Pull out the hard drive to the right.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Walker Tortorigi

Membre depuis le 29/01/2018

468 Réputation

4 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 7

30 derniers jours : 13

Total : 158