First, flip the laptop over and use the J1 screwdriver (in the iFixit tool kit) to unscrew the 15 screws indicated in the picture.
  • First, flip the laptop over and use the J1 screwdriver (in the iFixit tool kit) to unscrew the 15 screws indicated in the picture.

  • Make sure to put your screws in a safe place to make sure they do not get lost.

Ajouter un commentaire

Once you take the screws out, take the battery off; it should slide off easily.
  • Once you take the screws out, take the battery off; it should slide off easily.

Ajouter un commentaire

  • Next, move around the edges of the computer with the metal spudger prying off the casing. You should hear clicks as you do this; this is not the casing breaking, it is just popping off.

Ajouter un commentaire

  • Then, carefully take off the back casing of the laptop and set it aside.

Ajouter un commentaire

  • This is where the RAM is located that you will be replacing.

Ajouter un commentaire

  • There are two clips holding the RAM in place.

  • You will need to hold both of them back to be able to safely remove the RAM.

  • Use plastic spudgers, as the metal spudgers pictured here are not ESD-safe.

Ajouter un commentaire

  • Gently remove the RAM and insert replacement.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

David Amodei

Membre depuis le 30/11/2017

145 Réputation

1 tutoriel rédigé

Équipe

This guide was done wonderfully. My critique for your group is to be more specific with the direction of how to pull/place the components of the device. Your instructions were simple, yet clear. Great work.

Dan Hartzell - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 10

Total : 187