Aller au contenu principal

Introduction

How to replace the Keyboard on Toshiba Satellite, series 850.

The video manual is for cleaning the cooling system, but you can follow it, because at the beginning you can see how to disassemble the keyboard.


Please SUBSCRIBE to my channel ツ

Pièces

Aucune pièce spécifiée.

Vidéo d'introduction

  1. Switch-off the laptop and remove the battery. Switch-off the laptop and remove the battery.
    • Switch-off the laptop and remove the battery.

  2. The Keyboard is held by 7x locking clips. Use cutter and plastic tools to unlock them. The Keyboard is held by 7x locking clips. Use cutter and plastic tools to unlock them. The Keyboard is held by 7x locking clips. Use cutter and plastic tools to unlock them.
    • The Keyboard is held by 7x locking clips. Use cutter and plastic tools to unlock them.

  3. Disconnect the old Keyboard and you are ready to install the new one. To remove or re-insert the keyboard ribbon, simply flip the locking clip upwards to unlock and downwards to lock the ribbon. Alternatively, you may pull it outwards with a fingernail.
    • Disconnect the old Keyboard and you are ready to install the new one.

    • To remove or re-insert the keyboard ribbon, simply flip the locking clip upwards to unlock and downwards to lock the ribbon. Alternatively, you may pull it outwards with a fingernail.

    • .

    • Please SUBSCRIBE to my channel ツ

Conclusion

To reassemble your device, follow these instructions in reverse order.

12 autres ont terminé cette réparation.

ZFix

Membre depuis le 09/12/2013

178 781 Réputation

315 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

297 membres

983 tutoriels rédigés

Where does the 4-pin ribbon cable for a backlit keyboard connect?

thomja1 - Réponse

I want new keyboard, where can i get that ?

Eswara Prasad - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 5

7 derniers jours : 16

30 derniers jours : 54

Total : 11,562