Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Flip the laptop over so the bottom of the device is facing upward.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the 10 5mm Phillips screws, located on the bottom side of the notebook using the PH1 bit and the Magnetic Driver.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pry open the bottom cover of the notebook with the plastic spudger tools. Slide a thin tool along the edges without ports to pop open the latches.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the 1" yellow tape on top of the battery. This piece of tape is holding down the battery connection cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lightly grip the battery on the two longest sides. Gently pull up until the adhesive on the notebook is separated from the battery.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully unplug the battery from the device motherboard.
-
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.