Réparez vos affaires Communauté Boutique

Toshiba Satellite L305D-S5900 Keyboard Replacement

Introduction

If your keyboard needs a thorough cleaning or needs a replacement, this is the guide you’re looking for. This guide will show you how to safely remove your keyboard from the computer’s shell.

Ce dont vous avez besoin

  1. Toshiba Satellite L305D-S5900 Keyboard Replacement, Keyboard: étape 1, image 1 de 1

    • Power off your laptop before beginning disassembly.

    • The plastic strip boxed in red is located above the keyboard of the computer.

    Modifier

  2. Toshiba Satellite L305D-S5900 Keyboard Replacement: étape 2, image 1 de 3 Toshiba Satellite L305D-S5900 Keyboard Replacement: étape 2, image 2 de 3 Toshiba Satellite L305D-S5900 Keyboard Replacement: étape 2, image 3 de 3

    • There are three points of contact boxed in red needed to release located at the far left, the far right and the middle of the plastic strip.

    • Remove the plastic strip from one far end progressively towards the other end using a metal spludger.

    Modifier

  4. Toshiba Satellite L305D-S5900 Keyboard Replacement: étape 3, image 1 de 2 Toshiba Satellite L305D-S5900 Keyboard Replacement: étape 3, image 2 de 2

    • Remove the two 5.3 mm Phillips #1 screws that are beneath the strip.

    • The screws located at the far left and far right when the plastic strip is removed.

    Modifier

  5. Toshiba Satellite L305D-S5900 Keyboard Replacement: étape 4, image 1 de 2 Toshiba Satellite L305D-S5900 Keyboard Replacement: étape 4, image 2 de 2

    • Use the metal spludger to push the keyboard in the direction of the track pad and then lift the keyboard up.

    • Be careful not to pull too fast as there is still another cable attaching the keyboard.

    Modifier

  6. Toshiba Satellite L305D-S5900 Keyboard Replacement: étape 5, image 1 de 3 Toshiba Satellite L305D-S5900 Keyboard Replacement: étape 5, image 2 de 3 Toshiba Satellite L305D-S5900 Keyboard Replacement: étape 5, image 3 de 3

    • There are two tab boxed in red is located at each side of the ZIF (zero insertion force) connector.

    • Use a metal spludger to push the tab upward in order to release the cable ribbon.

    • Carefully pull out the ribbon cable from the ZIF (zero insertion force) connector.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

Sing Yang Cheng

Membre depuis le 10/20/16

501 Réputation

5 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

UMass Dartmouth, Team 3-6, Isaacson Fall 2016 Membre de l'équipe UMass Dartmouth, Team 3-6, Isaacson Fall 2016

UMASSD-ISAACSON-F16S3G6

2 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 324