Introduction

This guide will cover the access to and removal of the hard disk drive for replacement.

Pièces

Aucune pièce nécessaire.

  1. Locate the two sliding battery locks on the underside of the laptop.
    • Locate the two sliding battery locks on the underside of the laptop.

    Ajouter un commentaire

  2. Locate the right battery lock and slide it to the right.
    • Locate the right battery lock and slide it to the right.

    Ajouter un commentaire

    • While holding the left battery lock to the left, lift up the battery using the tab located on the top center of the battery.

    Ajouter un commentaire

    • Remove the battery from the laptop.

    Ajouter un commentaire

    • Unscrew the screws enough to remove the top cover.

    Ajouter un commentaire

    • Remove the cover by lifting the right side up at an angle before removing the entire cover.

    Ajouter un commentaire

    • Remove the hard drive from the SATA slot by tugging lightly on the ribbon cable to the right.

    Ajouter un commentaire

    • To separate the hard drive from the caddy, unscrew the two screws.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ricky Baker

Membre depuis le 26/03/2014

217 Réputation

2 tutoriels rédigés

Équipe

Clemson, Team 1-2, Benson Spring 2014 Membre de l'équipe Clemson, Team 1-2, Benson Spring 2014

CLEM-BENSON-S14S1G2

3 membres

10 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 542