Aller au contenu principal

Introduction

This guide will instruct you how to replace your Toshiba Satellite camera.

This will fix:

  • A broken video chat camera
  • A broken microphone

Pièces

Aucune pièce spécifiée.

  1. Using a plastic opening tool, remove the four plastic stickers located on the four corners of the LCD screen assembly. These plastic stickers are covering screws. Use a Phillips #1 screwdriver to remove the now uncovered 5.75mm screws and place them to the side. Use a Phillips #1 screwdriver to remove the now uncovered 5.75mm screws and place them to the side.
    • Using a plastic opening tool, remove the four plastic stickers located on the four corners of the LCD screen assembly. These plastic stickers are covering screws.

    • Use a Phillips #1 screwdriver to remove the now uncovered 5.75mm screws and place them to the side.

  2. With a plastic soft pry tool, open up the laptop display assembly by methodically prying from left to right. Be careful to not damage any internal circuitry. Do not attempt to pry apart the bottom, the LCD assembly never gets fully disassembled in this tutorial.
    • With a plastic soft pry tool, open up the laptop display assembly by methodically prying from left to right. Be careful to not damage any internal circuitry.

    • Do not attempt to pry apart the bottom, the LCD assembly never gets fully disassembled in this tutorial.

  3. Batteries pour ordinateurs portables

    Batteries pour toutes les grandes marques d'ordinateurs portables. Qualité assurée par notre garantie.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Batteries pour toutes les grandes marques d'ordinateurs portables. Qualité assurée par notre garantie.

    Acheter maintenant
  4. Remove the 2 pieces of black tape using a sharp tool to free the camera board, note that the camera board is still connected to a cable. Remove the 2 pieces of black tape using a sharp tool to free the camera board, note that the camera board is still connected to a cable.
    • Remove the 2 pieces of black tape using a sharp tool to free the camera board, note that the camera board is still connected to a cable.

  5. Carefully disconnect the camera board from the laptop. We used tweezers. Carefully disconnect the camera board from the laptop. We used tweezers.
    • Carefully disconnect the camera board from the laptop. We used tweezers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Robby

Membre depuis le 04/02/2013

52 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 7-7, Maness Winter 2013 Membre de l'équipe Cal Poly, Team 7-7, Maness Winter 2013

CPSU-MANESS-W13S7G7

5 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 4

Total : 1,833