Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the three 4.6 mm screws holding the panel using a #1 size Phillips head screwdriver. The panel is centered on the bottom of the laptop.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the cover, firmly lifting from the indent. It is recommended that you leave the screws in the panel.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Push the two tabs outwards, away from the RAM. The RAM should spring up.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the top RAM stick out gently.
-
Repeat steps 3 and 4 for the bottom RAM stick.
-
When installing the new RAM, line up the notches in the RAM's contacts and insert it at the same angle you removed it.
-
Annulation : je n'ai pas terminé ce tutoriel.
8 autres ont terminé cette réparation.
2 commentaires
Thank-You! So Much!
Awesome & Simple! Thank-you! My Model is a Satellite P105-S6147 1GBX2 DDR2-666 Sodimm 2BG Total.