Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the three screws from the back panel with Phillips #0 screwdriver.
-
Remove the back panel.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Locate the two clips holding the RAM chip in place.
-
Apply pressure to each clip, pulling them away from the RAM.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
To intall a new stick of RAM, carefully insert it into into the RAM slot.
-
Gently push down on the RAM chip until it snaps securely into place.
-