Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Flip laptop over so that the bottom is facing upwards.
-
Remove the two 5mm Phillips #0 screws from the bottom of the laptop.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Flip the laptop over and open the display.
-
Insert a plastic opening tool into the gap found between the keyboard and top case.
-
Pry upwards until you hear a click and work your way around the perimeter of the keyboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the keyboard up, but not all the way since there's a ribbon cable attached underneath.
-
Underneath the keyboard is a ribbon cable that attaches it to the rest of the laptop.
-
Unlock the ribbon cable by lifting up the two small locks on both sides of the connector on the motherboard.
-
Once unlocked, remove the ribbon cable and keyboard from the laptop.
-
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.