Introduction

If you feel that your laptop is becoming hot to the touch, or you hear the fan spin up more often than usual. It may be time to clean out the processor fan or replace it entirely.

Remove the fourteen 5mm Phillips #0 screws from the bottom of the laptop.
  • Remove the fourteen 5mm Phillips #0 screws from the bottom of the laptop.

Ajouter un commentaire

Using the plastic prying tools, go around the edge of the bottom of the laptop to release the cover.
  • Using the plastic prying tools, go around the edge of the bottom of the laptop to release the cover.

Ajouter un commentaire

  • Remove the four 5mm Phillips #0 screws from the battery.

  • Unplug the battery from the motherboard.

  • Remove the battery from the laptop.

Ajouter un commentaire

  • Remove the two 5mm Phillips #0 screws from the fan.

Ajouter un commentaire

  • Disconnect the fan from the motherboard.

Ajouter un commentaire

  • Remove the four 5mm Phillips #0 screws from the heat pipe.

  • Remove the fan and heat pipe from the laptop.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

William Mazanec

Membre depuis le 29/01/2018

1 186 Réputation

8 tutoriels rédigés

Équipe

USF Tampa, Team S5-G6, Passmore Spring 2018 Membre de l'équipe USF Tampa, Team S5-G6, Passmore Spring 2018

USFT-PASSMORE-S18S5G6

3 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 48