Introduction

The bulb of a projector is only rated for a certain amount of hours, so when it reaches the end of its life the image will become fuzzy and eventually die out. This guide will show how to replace the bulb on this projector.

Pièces

Remove the two screws from the bottom plate as shown.
  • Remove the two screws from the bottom plate as shown.

Ajouter un commentaire

Remove the two screws on the bulb housing.
  • Remove the two screws on the bulb housing.

Ajouter un commentaire

  • Pull the tab up and pull the bulb out vertically. Some force will be required, but it will come out.

  • Replace the bulb with an equivalent one.

OMG, is that entire thing the bulb? Or does the bulb get inserted into this piece? It says “replace” as if it it were merely a matter of pushing it in, but I see screws…

lkmemphis - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

Bryan Underwood

Membre depuis le 02/04/2018

697 Réputation

5 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 7

Total : 43