Introduction

Tablet screens often get damaged, this guide will walk a user through the steps of replacing a damaged screen. It is important to be careful about damaging parts, as most pieces are fragile.

Pièces

Aucune pièce nécessaire.

Locate the indentation at the bottom of the device.
  • Locate the indentation at the bottom of the device.

Ajouter un commentaire

Pull on the indentation and take off the casing of the device.
  • Pull on the indentation and take off the casing of the device.

Ajouter un commentaire

  • Remove the faulty battery and insert a replacement in its slot.

Ajouter un commentaire

  • Remove the six 2.4 mm, Phillips #0 screws circled in the image.

Ajouter un commentaire

  • Remove inner casing exposing the motherboard.

Ajouter un commentaire

  • Remove speakers by peeling back yelllow tape.

Ajouter un commentaire

  • Remove ribbon cable on top of motherboard.

Ajouter un commentaire

  • Peeling back yellow tape, remove the 2.5 mm Phillips #0 screws on top of motherboard.

Ajouter un commentaire

  • Remove the three 2.5 mm Phillips #0 screws attaching screen to main assembly.

Ajouter un commentaire

  • Verify that all screws are detached from screen.

Ajouter un commentaire

  • Detach screen from main assembly.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Stewart Jenkins

Membre depuis le 26/03/2018

207 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team S1-G1, Harley Spring 2018 Membre de l'équipe IUPUI, Team S1-G1, Harley Spring 2018

IUPUI-HARLEY-S18S1G1

7 membres

4 tutoriels rédigés

How can I do step 5? Do i need to push on the rectangle slots? It’s not very descriptive.

Nick “Blue” Wong - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 5

Total : 47