The assembled mixer.
  • The assembled mixer.

Ajouter un commentaire

To disassemble the 3 parts you've got to disconnect the little ring. Use a screw driver to get the ring loose.
  • To disassemble the 3 parts you've got to disconnect the little ring. Use a screw driver to get the ring loose.

Ajouter un commentaire

  • Unscrew 3 screws to open the casing.

Ajouter un commentaire

  • Unscrew 4 screws to disassemble the printplate and 2 to unscrew the wiring. Then you can lift the motor out by hand.

Ajouter un commentaire

  • To disassemble the motor holders you can slide them of the casing.

Ajouter un commentaire

Conclusion

un-screw 3 screw froms the housing

koen merkx

Membre depuis le 07/03/2018

121 Réputation

1 tutoriel rédigé

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 13

Total : 75