Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove all the screws with the spanner and Phillips screwdrivers.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Take off the mixer heads.
-
Put the mixer in mode 5.
-
Gently open the mixer.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the eject button by carefully lifting it out.
-
Remove the cable holder using the Phillips screw driver.
-
Remove the screw holding the mode button.
-
Carefully lift out the electrical unit.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the locking rings from the back end of the gears.
-
Lift the gears from encapsulant.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Replace gears.
-
Reassemble the mixer.
-
Happy mixing!
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
2 commentaires
Thats what I want to know too. I have a Hamilton Beach hand mixer. The gears look the same as the one shown in this article