Aller au contenu principal

UE BOOM 2 Battery Replacement

Ce dont vous avez besoin

  1. UE BOOM 2 Battery Replacement, Battery: étape 1, image 1 de 2 UE BOOM 2 Battery Replacement, Battery: étape 1, image 2 de 2
    • First, remove the D-ring located on the bottom of the UE Boom 2, the opposite end of the power button.

    • Remove by twisting in a counter-clockwise motion.

  2. UE BOOM 2 Battery Replacement: étape 2, image 1 de 2 UE BOOM 2 Battery Replacement: étape 2, image 2 de 2
    • After the D-ring has been removed, remove the rubber port cover.

  3. UE BOOM 2 Battery Replacement: étape 3, image 1 de 3 UE BOOM 2 Battery Replacement: étape 3, image 2 de 3 UE BOOM 2 Battery Replacement: étape 3, image 3 de 3
    • Remove the rubber stripping using a metal spudger.

    • Work around the edge of the rubber stripping slowly prying up the edge.

  4. UE BOOM 2 Battery Replacement: étape 4, image 1 de 1
    • Continue removing the rubber stripping down the side.

  5. UE BOOM 2 Battery Replacement: étape 5, image 1 de 3 UE BOOM 2 Battery Replacement: étape 5, image 2 de 3 UE BOOM 2 Battery Replacement: étape 5, image 3 de 3
    • Use a Phillips #2 screwdriver to unscrew the four 15mm screws on the bottom of the speaker. DO NOT OPEN SIDE WITH RED CAP (AS SHOWN IN SOME IMAGES), BATTERY IS ON OPPOSITE SIDE

    • Use a metal spudger to pry up the plastic cap.

  6. UE BOOM 2 Battery Replacement: étape 6, image 1 de 2 UE BOOM 2 Battery Replacement: étape 6, image 2 de 2
    • Carefully un-loop the cable with a plastic spudger and unplug from motherboard.

    • Slowly pull out the battery, and handle with care.

Conclusion

To reassemble your device, follow these instructions in reverse order.

46 autres ont terminé cette réparation.

Brandon Yowakim

Membre depuis le 01/18/18

1 164 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team S1-G3, Zimmerman Spring 2020 Membre de l'équipe Cal Poly, Team S1-G3, Zimmerman Spring 2020

CPSU-ZIMMERMAN-S20S1G3

5 membres

10 tutoriels rédigés

26 commentaires

what kind of battery ?and do you have a link to buy one

wrig5235 - Réponse

I was looking for a battery replacement all over the place. Came up with this site that carries parts for the Boom 2:

https://www.joesge.com/products/ue-ultim...

Frederic - Réponse

Why is this set to difficult though? It doesn’t look THAT hard… And will this affect waterproofing of the feature?

Frederic - Réponse

Because you do not simply stick the plunger in and pop those tabs. They are a force of evil and I even bent my metal tools to open mine.

Joseph Murphy -

It isn't that hard if you've done a couple of repairs, although you gotta work slow and really make sure you got yourself like 3-4 spudger like items (butter knife) and look at reference images where the tabs are. Btw. You don't need to remove more than the bottom plastics and the plate with 4 screws to change the battery. Managed to change my battery while not damaging a single plastic tab

Lucas Schießl -

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 37

7 derniers jours : 292

30 derniers jours : 1,140

Total : 114,244