Introduction

This guide will show you how to replace the battery of your Udi U818A FPV drone controller. You will need a JIS #0 screwdriver to complete this task.

  1. Turn the remote control over so that the buttons and joysticks are facing downward.
    • Turn the remote control over so that the buttons and joysticks are facing downward.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Using a JIS #0, unscrew the silver 4mm screw that holds the battery cover in place.
    • Using a JIS #0, unscrew the silver 4mm screw that holds the battery cover in place.

  4. Open the battery access panel.
    • Open the battery access panel.

    • Disconnect the red and black wires.

    • Remove the depleted battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Raghda

Membre depuis le 11/10/2018

147 Réputation

1 tutoriel rédigé

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 52