Aller au contenu principal

Uniden TCX905 Circuit Board Replacement

Ce dont vous avez besoin

  1. Uniden TCX905 Circuit Board Replacement, Battery Cover: étape 1, image 1 de 2 Uniden TCX905 Circuit Board Replacement, Battery Cover: étape 1, image 2 de 2
    • Starting from the top of the cover, slide down and away from the phone with your thumb

    • Lift battery cover off of batter and place it to the side

  2. Uniden TCX905 Circuit Board Replacement, Battery Pack: étape 2, image 1 de 2 Uniden TCX905 Circuit Board Replacement, Battery Pack: étape 2, image 2 de 2
    • Once battery cover is removed, place your thumb and index fingers on the the wires near the receptacle

    • Gently pull straight up on the wires until a click is heard which signifies the battery is completely disconnected

    • Place battery pack to the side

  3. Uniden TCX905 Circuit Board Replacement, Back Shell: étape 3, image 1 de 2 Uniden TCX905 Circuit Board Replacement, Back Shell: étape 3, image 2 de 2
    • Remove the two 11mm screws inside the battery storage compartment using Phillips #1 screwdriver (located near the very bottom of the phone)

  4. Uniden TCX905 Circuit Board Replacement: étape 4, image 1 de 3 Uniden TCX905 Circuit Board Replacement: étape 4, image 2 de 3 Uniden TCX905 Circuit Board Replacement: étape 4, image 3 de 3
    • Gently open phone casing along the seam at the bottom of the phone using index and middle fingers of both hands

  5. Uniden TCX905 Circuit Board Replacement: étape 5, image 1 de 3 Uniden TCX905 Circuit Board Replacement: étape 5, image 2 de 3 Uniden TCX905 Circuit Board Replacement: étape 5, image 3 de 3
    • Ensure that wired connection between circuit board and back shell is not strained

    • Fold the back shell underneath the front shell and circuit board

  6. Uniden TCX905 Circuit Board Replacement, Circuit Board: étape 6, image 1 de 2 Uniden TCX905 Circuit Board Replacement, Circuit Board: étape 6, image 2 de 2
    • Carefully remove the middle two 7mm screws, the outer top 9mm screws, and the top middle 7 mm screw that hold the logic board to the front shell of the phone casing using the Phillips #1 screwdriver

  7. Uniden TCX905 Circuit Board Replacement: étape 7, image 1 de 3 Uniden TCX905 Circuit Board Replacement: étape 7, image 2 de 3 Uniden TCX905 Circuit Board Replacement: étape 7, image 3 de 3
    • Using index finger and thumb, carefully remove the circuit board from the front shell of phone

Conclusion

To reassemble your device, follow these instructions in reverse order.

Gary Pence

Membre depuis le 03/26/14

807 Réputation

8 tutoriels rédigés

Équipe

Clemson, Team 1-1, Benson Spring 2014 Membre de l'équipe Clemson, Team 1-1, Benson Spring 2014

CLEM-BENSON-S14S1G1

3 membres

16 tutoriels rédigés

2 commentaires

I liveI at Buenos Aires, Argentina. I need to repaire a Uniden TCX905 Circuit Board and I wish to receive the manual for repaire, if it existe. Thanks in advance . Ruben E. (zrubene@gmail.com)

zrubene - Réponse

Where can one get a TCX905 replacement circuit board?

greywing - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 891