Place the phone facedown on a cleared work area
  • Place the phone facedown on a cleared work area

  • Remove the back case by applying moderate force to the indentation in the lower left corner of the case.

Ajouter un commentaire

Grip the top right corner of the battery.
  • Grip the top right corner of the battery.

  • Remove the battery by pulling it outwards.

Ajouter un commentaire

  • Remove the four screws on the back of the phone using a Philips 000 screwdriver

Ajouter un commentaire

  • Separate the frame evenly using a plastic opening tool.

  • Be careful, as the frame is thin and can break easily.

Ajouter un commentaire

  • Use a Phillips #000 screwdriver to remove the four screws that secure the motherboard.

Ajouter un commentaire

  • Disconnect the ribbon cable from the motherboard using rounded, spade-tipped tweezers.

Ajouter un commentaire

  • Peel the white circuit on left side of the frame by inserting fine-tipped tweezers between it and the frame.

  • The white circuit is flimsy and securely glued to the frame.

Ajouter un commentaire

  • Set aside the circuit board from the screen protector.

Ajouter un commentaire

  • Replace the old plastic screen with the new one.

  • Reassemble the phone by following the steps in reverse order.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

John Stavrianopoulos

Membre depuis le 08/02/2018

169 Réputation

2 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 42