Introduction
Do any of the lights on your device appear to be dimly lit or not come on at all? Replacing the LEDs may solve your problem.
Ce dont vous avez besoin
-
-
To remove the battery door, loosen the screw shown using a Phillips #2 screwdriver.
-
-
-
-
Pickup the array by the opening in the center of the board.
-
Remove the faulty LEDs by desoldering each from the board. You may refer to this soldering guide if necessary.
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.