Réparez vos affaires Communauté Boutique

VTech Kidizoom Smartwatch DX2 Wristband Replacement

Introduction

If your wristband has visible damage, is worn, torn or broken the following guide will help you repair your problem.

Ce dont vous avez besoin

  1. VTech Kidizoom Smartwatch DX2 Wristband Replacement, Wristband: étape 1, image 1 de 1

    • Begin by placing the watch on its side.

    Modifier

  2. VTech Kidizoom Smartwatch DX2 Wristband Replacement: étape 2, image 1 de 1

    • Next, use the flat end of the spudger to wedge between the small-headed pin (located on the band closest to the watch) to pull the pin up through the other side.

    Modifier

  4. VTech Kidizoom Smartwatch DX2 Wristband Replacement: étape 3, image 1 de 1

    • Pull the pin out, however not fully, feeling slight resistance is normal.

    Modifier

  5. VTech Kidizoom Smartwatch DX2 Wristband Replacement: étape 4, image 1 de 1

    • Finally, pull the wristband off. Repeat on the opposite side of the watch if necessary.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Sydney

Membre depuis le 10/25/18

344 Réputation

2 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

UMass Dartmouth, Team S3-G5, Peak Fall 2018 Membre de l'équipe UMass Dartmouth, Team S3-G5, Peak Fall 2018

UMASSD-PEAK-F18S3G5

4 membres

7 tutoriels rédigés

Un commentaire

My Vtech DX2 had a split pin. One side of the pin was the long side and the other very very short. So look out for that. Thanks for this tutorial, was very helpful.

Ryan Laurel - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 14

30 derniers jours : 49

Total : 7,247