Difficulté
Modérée
Étapes
14
Temps nécessaire
30 minutes
A besoin de meilleures images
De meilleures photos amélioreront ce tutoriel. Aider en proposant de nouvelles photos!
Problème de balisage
Ce tutoriel nécessite de meilleures balises. Améliorez-le par des corrections ou des annotations de balisage.
Texte bizarre
Certaines parties de ce texte sont confuses, répétitives ou hors-sujet. Modifie-les pour les rendre plus claires !
Introduction
This guide will teach the user how to replace the fan.
Pièces
-
Flip laptop over so that "Service TAG" is shown at the top left corner.
-
Remove highlighted screws from back of laptop.
-
Remove screws from panels at bottom right hand side.
-
Remove two panels at bottom right hand corner by sliding in direction of arrows shown
-
Remove screws underneath removed panels.
-
Remove Hard drive from computer.
-
Remove battery by pressing inwards on both tabs.
-
Remove cover at top left of laptop by pulling outwards.
-
Remove backplate of laptop by pulling outward.
-
Gently remove the connector for the wire running over the fan by lifting the tab on top up with your fingernail and sliding it out.
-
Unscrew the four screws which hold in the fan.
-
Lift out the fan and place it to the side.
-
Remove the connection by gently pull the remaining connection up from where it is attached.
-
Replace the old fan with the new one.
-
Another option to making it quieter it is to blow off the accumulated dust either by blowing on it, or more effectively by using an air hose.
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce guide.
Une autre personne a terminé cette réparation.
Équipe
University of Maryland, Team 2-6, Vijaybhaskar Spring 2014 Membre de l'équipe University of Maryland, Team 2-6, Vijaybhaskar Spring 2014
UMD-VIJAYBHASKAR-S14S2G6
4 membres
4 tutoriels rédigés
