Introduction
The front led light consists of 6 parts:
- The housing with the connected led ring print and the connected led main led
- A heatsink with copper attachment to the frame of the bike for cooling
- The front cap
- The mirror
- A large plastic ring to seal the mirror
- A small ring to seal the large plastic ring.
No glue was used between parts. The large plastic ring is fixated by a rubber coating.
Ce dont vous avez besoin
Conclusion
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.
